The following information is for the EMANT300, EMANT380

Discontinued Products

Prototype Board Application Adaptor
Prototype board with DB25 socket. Soldering required

Breadboard Application Adaptor
Breadboard with DB25 socket. For quick experiments

3.3V Regulator
Regulates input voltage to 3.3V output

Battery Holder
3 AA Battery Holder

Screw Terminals Application Adaptor
Screw Terminal with Prototype board. For quick wiring and custom signal conditioning circuits

24V DIO Application Adaptor
Connect the DAQ modules to up to 24V Digital Signals

Bridge Completion Network
Three 120 ohm resistors with screw terminals

Kyowa Strain Gauge
120 ohm, GF 2.11, 2mm length

Hand-held Biopotential Electrodes Assembly
Measures biopotential voltages (ECG) with hand-held electrodes

Pinch Meter Assembly
Measures Pinch Strength. Used to demonstrate a typical strain gage application

Compass Application Adaptor
HMC1052 Measure direction and magnitude of Earth's magnetic fields from 120 micro-gauss to 6 gauss

Accelerometer Application Adaptor
MMA7260QT +/-1.5g to 6g Three Axis Low-g Micromachined Accelerometer

Strain Application Adaptor
2.5V excitation, Up to 6 inputs, Quarter, half or full bridge configurations