PROTOTYPE BOARD APPLICATION ADAPTOR FOR EMANT300
The Prototype Board Application Adaptor connects the pin out of the DB25
connector of the EMANT300
Low Cost USB Data Acquisition Module to your custom application
circuit.
It is used for prototyping of PC Based Data Acquisition Solutions. Together with the EMANT300 Low Cost USB Data Acquisition Module, they allow for connection to real world sensors and signals without the need for fabricating custom printed circuit boards. Soldering is required.
Comprises 2 loose pieces
2-layer printed circuit board with plated through 32 x 25 grid holes
right angled DB25 socket
EMANT300 USB DAQ module male DB25 pin out
Note: If you are making any analog input measurements, pin 4 REFIN- must be connected to pin 2 AGND. When you do this the internal reference is correctly set up.
Pin 2 is connected to pin 4 in other application adaptors that measure analog inputs, like the light application adaptor and strain application adaptor. Not all applications require this connection eg when using an external reference or making ratiometric measurements. If you are using the internal reference (default setting), this must be done.
Price US$12
Status In Stock
